Canvasman Frames

Bespoke Frames

It is extremely important that there is always an adequate amount of tension in your fabrics, however when our measurers are sent out to evaluate your boat they might discover that the existing frames are too weak or not suitable for our covers (such as aluminium framing). Of course, not every boat requires new framing.

Your measurements are handed over to our design team, who design your steel frame in-house, at our Canvasman building. We also manufacture the steel frames in-house, with the exception of large structures, this is because the frame bender we have on-site can only bend metal tubing that is up to 1.5 inches wide.

Above all, we’re so confident in our products that we offer a full five-year guarantee against defects in materials or craftsmanship.